Super Weathering Exterior Wall Latex Paint

Product description

This product is non-toxic, non-combustible, has good adhesion, soft luster, mildew and moisture resistance, good water and weather resistance, and easy construction. It is especially suitable for flat decoration of building exterior walls.

Instruction

Construction method: stir well before use; mix with water to a suitable construction viscosity; apply by brush or roller.

Gloss: Semi-gloss.

Drying time: Surface dry: 1 hour, recoating time: at least 2 hours; complete drying time: 5 days (at a temperature of 20°C and relative humidity of 65%; the drying time will be slightly affected by surface treatment, color or other factors There are different).

Coating rate: 8.0～10.0㎡/liter·layer (the coating area is slightly different due to factors such as surface treatment, color, and coating sequence).

Coating dilution: 1. The amount of dilution with water is 10-20% (V/V) for dilution with water. Basic treatment: The surface to be painted should be free of grease, dust, or water, and the newly built ash or wall should be fully dry.

Construction temperature: The ambient and wall temperature are above +5°C, the relative humidity is not higher than 85%, the wall moisture content is less than 10%, and the PH value is less than 10.

Standard packaging: 4L, 20L iron drum.

Storage and shelf life: sealed and stored in a cool and dry place, avoid direct sunlight, and maintain a certain degree of ventilation; strictly prevent frost (not lower than 0 ℃), the storage time should not exceed four years, and the validity period is five years.

Precautions

During construction, attention should be paid to maintaining air circulation, and the paint should be kept away from heat sources and direct sunlight for a long time. To avoid contamination to skin and eyes or inhalation of excessive paint mist, use appropriate protective equipment. In case of contact with the eyes, rinse immediately with plenty of water and seek medical treatment. Keep out of reach of children.