Exterior Wall Project Latex Paint

Product description

This product has excellent outdoor durability and covering power, and has a good balance of durability and stain resistance. It meets the national environmental protection requirements and meets the national standard. According to the requirements of GB/T9755-2014 qualified products, it is matched with our company's exterior wall primer and constructed according to the standard construction requirements, which can guarantee that the paint film will not fall off for 3 years.

Instruction

Main ingredient: Acrylic emulsion

Color base: white

Drying time: Surface drying time 1h/25℃ (drying time will vary with ambient temperature and humidity), recoat at least 3-4 hours/25℃. Coating rate: 8-10㎡/kg/pass (the actual coating area will vary due to the construction method or the roughness of the wall)

Paint dilution: can be diluted with water, the proportion does not exceed 20%

Construction method: Before use, it should be fully stirred and evenly applied by brushing or roller coating.

Standard packaging: 18L iron drum

Basic treatment:

1. The base layer is required to be firm, solid, dry, smooth, clean, and free from dust and oil.

2. It must be painted with the corresponding primer, the primer must be painted evenly, and the base layer must be completely closed

3. Before painting the primer, check the moisture content and PH value of the substrate putty, the moisture content is less than 10%, and the PH value is less than 10.

Construction climate: It is not suitable for construction when the temperature is lower than 5℃ or the relative humidity is higher than 85%.

Storage:

1. Store in a cool and dry place at 0-40°C, avoid direct sunlight, store in a well-ventilated place, and keep the container tightly sealed.

2. If the product is not opened and properly stored, the storage period is 24 months.

Executive standard

Quality Standard: Comply with GB/T 9755-2014 national standard.

Safety performance: In line with the national standard GB 18582-2020 "Limits of Hazardous Substances in Wall Coatings for Buildings".

Precautions

During construction, attention should be paid to maintaining air circulation, and the paint should be kept away from heat sources and direct sunlight for a long time. To avoid contamination to skin and eyes or inhalation of excessive paint mist, use appropriate protective equipment. In case of contact with the eyes, rinse immediately with plenty of water and seek medical treatment. Keep out of reach of children.